TIRE BALANCING
To balance tires on bolt-on wire-wheels (tipo S), the standard process like cast or steel wheels should be applied.
To be able to balance the wheels with centre-lock system correctly, one must use the correct cones. A 60° cone at the bottom flange and 20° cone at the ring of the centre-piece, the balancing shaft doesn’t need to be splined.
The most popular typologies are 32-42-52-62-90 with the proper cone diameters. Some later models such as RW 4039 have bottom cones of 50°.
Please refer back to the database at the factory. Absolutely do not use standard 45° cones which are mostly used on regular balancing machines especially pay attention to not use the back of the centre-piece flange as a mounting surface, it will result in false reading. Balancing should always be performed by professionals with experience in centre-lock systems.
Tire Balancing
|
BORRANI AMERICAS
|
|
||||||||
|
||||||||||
|
||
|
|